| PARAMETER | Unit | Dimension |
| Max. cut | ||
| Cutting at an angle of 90o | ||
| circular cross-section | mm | 350 |
| rectangular cross-section | mm | 400x320 |
| Cutting at an angle of 45o | ||
| circular cross-section | mm | 230 |
| rectangular cross-section | mm | 220x320 |
| Height of working surface | mm | 860 |
| Dimensions of the band saw blade | mm | 34x1.1x4570 |
| Cutting Speed | ||
| Two-speed gear | m/min | 35/70 |
| Reducer-inverter set | m/min | 15 - 90 |
| Other | ||
| Power of band saw blade drive motor | kW | 2.2 |
| Length of single feed | mm | 0 - 500 |
| Max. length of feeding | mm | 500 - 9999 |
| Single feed accuracy | mm | 0.2 |
| Length/Width/Height | mm | 2500x2600x1500 |
| Weight of band saw machine | kg | 1200 |
BAND SAW MACHINE PTN 350 NC
Standard equipment:
- Two-speed reducer (35, 70 m/min)
- Hydraulic controlling of raising and lowering of cutting arm and clamping of a vice, hydraulic clamp of feed vice
- Hydraulically controlled band saw blade tension with automatic compensation of elongation
- Roller feed table on the machine body (length: 1.5 running metres)
- Hydraulically controlled feed vice (single feed up to 500 mm)
- PLC controller with liquid crystal display (measurement of the blade speed, controlling of cut length, number of cuts, measurement of the cycle time, measurement of the band saw blade work time, measurement of the band saw machine work time )
- System of material multiple feed
- Cooling system
- Flat table on the receiving side
Additional equipment:
- Device for cutting in packs (range: 280×160)
- Arm turntable – cutting at an angle of 0 – 45O
- Reducer – inverter from NORD 2.2 kW (range: 15 – 90 m/min)
- Ball screws of automatic feeder drive (single feed up to 1000 mm)
- Moving vice jaw in the vice
- Roller feeder (length: 1,5 running metres)
- Roller receiver (length: 1,5 running metres)
- Adjustment of vice clamping force
- Chip conveyor